HCA October Container and Equipment Auction - Wright City, MO

Welcome to the auction! Please review all terms and conditions before placing your bids. Stay informed on auction updates by texting BID to 833-429-6557. Have questions? Contact us at [email protected].

Happy bidding!

• Info for Equipment Buyers – Please Read

  You are responsible for inspecting all items prior to bidding. All equipment is sold AS-IS, with no warranties, guarantees, or returns. We do our best to provide accurate descriptions, but buyers must evaluate items for themselves.

  Item descriptions were provided by the seller. If Higher Calling Auctions observes any visible damage, it will be photographed. Review all photos carefully before placing a bid.

  Loading Notice: Buyers are responsible for loading all equipment and containers. Higher Calling Auctions has a skid loader onsite and may assist with loading smaller items at our discretion.

  Important Buyer Reminders:

  • Equipment may only contain light-duty oil used during transport. Manufacturer recommends assuming no operational oil is present at delivery.

  • Attachment hardware and hydraulic lines may be loose. Inspect and secure all components before use.

  Questions? Contact us at [email protected].

Bid increments are in place to ensure fairness for all participants. Take advantage of our "Max Bid" feature, which allows automatic bidding up to your specified maximum while following the set increments. Be sure to review the increment table before placing your bids.

For any questions or assistance, please contact us at [email protected].

Happy bidding! To see video on finding bid increment table, click here

Lot Description

Bidders must register with a valid credit card to participate in this auction. For any questions or assistance, please contact us at [email protected].

Happy bidding!

Inspect before you bid! Items are sold "as-is, where-is, and as-presented." Previews are available upon request.

For any questions or to schedule a preview, contact us at [email protected].

Happy bidding!

Auction Pickup Details – Please Read Before Bidding

• Pickup location: 28699 Roelker Road, Wright City, MO 63390
• Pickup for this auction will take place at the location on the following dates:

  • ALL ITEMS MUST BE REMOVED BY SATURDAY, November 8, 2025, 3:00 PM.
    Buyer is responsible for all loading, rigging, and moving of equipment.

    Pickup Times:
    • Thursday, November 6, 2025 | 10:00 AM – 5:00 PM
    • Friday, November 7,2025 | 9:00 PM - 2:00 PM
    • Saturday, November 8, 2025 |  10:00 PM - 3:00 PM

  • Pickup outside of these times is by appointment only and not guaranteed.
• Buyers are fully responsible for all moving, loading, rigging, and transportation of their purchases. No loading equipment or assistance will be provided onsite.
• Shipping Container Buyers:
  • A contact for a third-party transport company will be shared upon request.
  • Buyer may use any transport company they prefer. 
    • Any arrangements or fees for container transport will be strictly between the buyer and that company.
• Need help or have questions? Reach us at [email protected].

Thanks for bidding with Higher Calling Auctions!

Invoices will be sent and available within 2 business days after the auction closes. Please check all your inboxes, including spam or junk folders, for updates.

For any questions or assistance, contact us at [email protected].

Soft Close Notice:
This auction features a soft close. If a bid is placed in the final moments, the closing time for that item will automatically extend, unless noted otherwise: 

• Personal Property: Extends by 2 minutes

• Machinery: Extends by 3 minutes

• Real Estate: Extends by 5 minutes

This gives all interested bidders a fair chance to compete until no further bids are received.

Happy Bidding!

Square Drive: 1"
Air Pressure: 100-170 psi
Mechanism: Pinless Hammer
Max Torque:  2800 ft·lb
Applicable Torque: 1106-1895 ft·lb
Blade Length:  2.1in
Weight: 34Ibs
Anvil Length:  8.85in
No-Load Speed:  4200rpm
Air Inlet:  1/2in PT
Hose Inner Dia.: 1/2in
SHIPPING WEIGHT: 39LBS

Square Drive: 1"
Air Pressure: 100-170 psi
Mechanism: Pinless Hammer
Max Torque:  2800 ft·lb
Applicable Torque: 1106-1895 ft·lb
Blade Length:  2.1in
Weight: 34Ibs
Anvil Length:  8.85in
No-Load Speed:  4200rpm
Air Inlet:  1/2in PT
Hose Inner Dia.: 1/2in
SHIPPING WEIGHT: 39LBS

Square Drive: 1"
Air Pressure: 100-170 psi
Mechanism: Pinless Hammer
Max Torque:  2800 ft·lb
Applicable Torque: 1106-1895 ft·lb
Blade Length:  2.1in
Weight: 34Ibs
Anvil Length:  8.85in
No-Load Speed:  4200rpm
Air Inlet:  1/2in PT
Hose Inner Dia.: 1/2in
SHIPPING WEIGHT: 39LBS

8ft | 2.5" x 5" Option Extension Dimensions 3" x 6" 

8ft | 2.5" x 5" Option Extension Dimensions 3" x 6" 

8ft | 2.5" x 5" Option Extension Dimensions 3" x 6" 

8ft | 2.5" x 5" Option Extension Dimensions 3" x 6" 

Class 2 Quick Hitch, Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

Outside width: 46"
 Inside width: 45"
 Height: 18.5"
 Top bar: 3/8" thick
 Plate: 3/8" thick
 Weight: 53 lbs.

Outside Width: 45.2"
Inside Width: 44.29”
Length: 16.81". 
Thickness: 1/4”.

Weight: 82 lb
Outside Width: 45.2"
Inside Width: 44.29”
Length: 16.81". 
Thickness: 1/4”.

Weight: 82 lb
Outside Width: 45.2"
Inside Width: 44.29”
Length: 16.81". 
Thickness: 1/4”.

Class 1 Quick Hitch, Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

Class 2 Quick Hitch, Standard 2-inch trailer receiver Heavy duty steel construction - includes top and bottom pins Easy to move trailer with tractor tow bar Quick and easy installation Width (from end of pin): 32"; Height (bottom pin to top pin): 19"

23HP 2 Cylinders RATO Gasoline Engine with EPA, Bucket and Side Swing, 16.8KW and EPA Certification, 

23HP 2 Cylinders RATO Gasoline Engine with EPA, Bucket, 16.8KW and EPA Certification, Serial No. 

23HP 2 Cylinders RATO Gasoline Engine with EPA, Bucket and Side Swing, 16.8KW and EPA Certification, Serial No. 

15HP RATO Gasoline Engine with EPA Certification, Bucket, Hydraulic Thumb, and Front Fill Blade,

15HP RATO Gasoline Engine with EPA Certification, Bucket, Hydraulic Thumb, and Front Fill Blade,

Unit has some cosmetic body damage from shipping container. Mechanically sound

RATO 20 15 hp, front push blade,  

Working weight of complete machine: 2028.25Ibs
Bucket capacity: 1.06 ft3
Walking speed low/high: 0-1.12 mph
Climbing ability: 15%
A Maximum excavation height: 100.79in
B Maximum unloading height: 70.87 in
C Maximum excavation depth: 66.65in
E Maximum excavation radius: 120.47in
Bulldozer shovel width/height: 35.71/7.87 in

Rated set pressure of main pump:3625.94psi
Maximum flow of main pump: 5.71 gal/min
Multiple valve: 4 Mechanical+ 4 Hydraulically
Controlled

13.5HP RATO Gasoline Engine with EPA Certification, 8.6KW , Bucket, with pilot system

13.5HP RATO Gasoline Engine with EPA Certification, 8.6KW , Bucket, with pilot system

13.5HP RATO Gasoline  Engine with EPA Certification, 8.6KW,with pilot system, Bucket

13.5HP RATO Gasoline Engine with EPA Certification, 8.6KW , Bucket, with pilot system

420cc Gas Engine with EPA certification, 36.5IN Wide Base, , 4FT Long 6IN Wide Tracks, Hydraulic Boom & Bucket Controls, 14IN Bucket

23 Hp 2 cylinder 739CC Mini Skid Steer Loader, Lifting Capacity: 840 Lbs. 

Motor Speed: 3600 Rpm

Max Torque: 2500 Rpm
Cooling Method: Air-cooled
Drive System: Hydraulic Four-wheel Drive
Travel Speed: 5.5 Km/h
Standard Lifting Capacity: 662 Lbs
Hydraulic Drive System : 180 Bar
Hydraulic Oil Tank Capacity: 22.7 Qt

Electrical System :12 V
Battery Capacity: 36 Ah
Braking System: Hydraulic Closed Brake

23 Hp 2 cylinder 739CC Mini Skid Steer Loader, Lifting Capacity: 840 Lbs. 

Motor Speed: 3600 Rpm

Max Torque: 2500 Rpm
Cooling Method: Air-cooled
Drive System: Hydraulic Four-wheel Drive
Travel Speed: 5.5 Km/h
Standard Lifting Capacity: 662 Lbs
Hydraulic Drive System : 180 Bar
Hydraulic Oil Tank Capacity: 22.7 Qt
Tires: 18*8.5-8
Electrical System :12 V
Battery Capacity: 36 Ah
Braking System: Hydraulic Closed Brake

Details: Four Side Open Door, one end door, lock box, side forklift pockets.

Measures 8FT Wide, 40FT Long, 113"Tall.  

Side Door Opening Measurement: 92" W x 100" T x 88" Deep,

Weight 9,500lbs.

Single Use, (2) open side doors, (1) end door, lock box, side forklift pockets, 

In packing. Light Assembly required.

Massage technique: Kneading, Massage
Automatic mode: Kneading, Massage, Power, Leisure, Sleep
Roller massage area: Head, Neck, Shoulder, Back, Waist ,Foot
Airbag massage area: Head, Shoulders, Arms, Waist, Buttocks, Legs, Foot
Heating part: Waist, Calf
Zero gravity function: Zero gravity massage
Control method: LCD Wired Remote Control
Fabric material: PU wear-resistant leather Leg
extension length: 5.9 in
Applicable height: 55.1-69 in
Maximum Load Weight: 220 lbs
Upright Dimensions: 57*29.5*39.4 in
Reclined Dimensions: 68.9*29.5*33.5 in
Net weight/Gross weight: 117 lbs/ 140 lbs
Power: 90W

In packing. Light Assembly required.

Massage technique: Kneading, Massage
Automatic mode: Kneading, Massage, Power, Leisure, Sleep
Roller massage area: Head, Neck, Shoulder, Back, Waist ,Foot
Airbag massage area: Head, Shoulders, Arms, Waist, Buttocks, Legs, Foot
Heating part: Waist, Calf
Zero gravity function: Zero gravity massage
Control method: LCD Wired Remote Control
Fabric material: PU wear-resistant leather Leg
extension length: 5.9 in
Applicable height: 55.1-69 in
Maximum Load Weight: 220 lbs
Upright Dimensions: 57*29.5*39.4 in
Reclined Dimensions: 68.9*29.5*33.5 in
Net weight/Gross weight: 117 lbs/ 140 lbs
Power: 90W

Ser No. ZWD202508164-120

Massage technique: Kneading, Massage
Automatic mode: Kneading, Massage, Power, Leisure, Sleep
Roller massage area: Head, Neck, Shoulder, Back, Waist ,Foot
Airbag massage area: Head, Shoulders, Arms, Waist, Buttocks, Legs, Foot
Heating part: Waist, Calf
Zero gravity function: Zero gravity massage
Control method: LCD Wired Remote Control
Fabric material: PU wear-resistant leather Leg
extension length: 5.9 in
Applicable height: 55.1-69 in
Maximum Load Weight: 220 lbs
Upright Dimensions: 57*29.5*39.4 in
Reclined Dimensions: 68.9*29.5*33.5 in
Net weight/Gross weight: 117 lbs/ 140 lbs
Power: 90W

Ser No. ZWD202508164-120

Massage technique: Kneading, Massage
Automatic mode: Kneading, Massage, Power, Leisure, Sleep
Roller massage area: Head, Neck, Shoulder, Back, Waist ,Foot
Airbag massage area: Head, Shoulders, Arms, Waist, Buttocks, Legs, Foot
Heating part: Waist, Calf
Zero gravity function: Zero gravity massage
Control method: LCD Wired Remote Control
Fabric material: PU wear-resistant leather Leg
extension length: 5.9 in
Applicable height: 55.1-69 in
Maximum Load Weight: 220 lbs
Upright Dimensions: 57*29.5*39.4 in
Reclined Dimensions: 68.9*29.5*33.5 in
Net weight/Gross weight: 117 lbs/ 140 lbs
Power: 90W

Paladin 40 Gallon 2-Stage Truck Mounted Air Compressor
Specifications:
• Tank capacity: 40 gal
• Max. pump running pressure: 175 PSI at 80% duty cycle
• Air delivery:
14.5 CFM @ 175 PSI
16.5 CFM @ 135 PSI
18.7 CFM @ 90 PSI
20.6 CFM @ 40 PSI
• 1-½"NPT ball valve
• 3 AMP battery charging circuit (battery not included)
•Powder-coated tank finish
•Engine: Briggs & Stratton 10HP,4-stroke,OHV,gasoline
•Displacement: 306 cc
•Regulated charging system
•Low oil shut down
•Start type: recoil/electric

Length: 20
Width: 20
Ridge height: 12.5'
Side-wall height: 10'
Frame structure: 2"-16 GA square steel
Corrugated steel roof panel: 30 GA
Roof color: Charcoal Grey

Shipping Dim 86"x38"x20" 

Shipping weight 1164lbs

Hydraulic Pressure: 3000 psi
Height: 54.5 in
Overall Width: 72.5 in
Overall Length: 49 in
Working width: 60 in
Weight: 1400 lbs

Overall Height 27.9in
Overall Width 84in
Overall Depth 33.2in.
Cutting Edge Thickness 1/2-in.
Angle 28 degrees left or right
Product Weight 658 lbs

Square Drive: 1"
Air Pressure: 100-170 psi
Mechanism: Pinless Hammer
Max Torque:  2800 ft·lb
Applicable Torque: 1106-1895 ft·lb
Blade Length:  2.1in
Weight: 34Ibs
Anvil Length:  8.85in
No-Load Speed:  4200rpm
Air Inlet:  1/2in PT
Hose Inner Dia.: 1/2in
SHIPPING WEIGHT: 39LBS

Voltage: 110 V±15%
Frequency : 50/ 60 Hz
Phase: 1
Rated input Power: 5.0kW(MIG)/ 3.7kW(TIG)/ 5.1kW(MMA)
Rated input Current :45.8A(MIG)/ 34.0A(TIG)/ 46.3A(MMA)
No load voltage : 70± 5 V
Current range: 35-140A(MIG)/15-140A(TIG)/ 30-120A(MMA)
Applicable electrode dia.: 0.8-16 mm(MiG)/ 1.6-3.2 mm(MMA)
TIG Tungsten electrode: MAX 2.4 mm
Duty cycle (%): 60%
Refrigeration type: Fan
Efficiency : 0.73μ
Power factor: 0.73 Cos
Insulation class :F Grau
Protection class: 21S lP
Dimension LxWxH: 12.2 x 6.5 x 8.3 in

Voltage: 110 V±15%
Frequency : 50/ 60 Hz
Phase: 1
Rated input Power: 5.0kW(MIG)/ 3.7kW(TIG)/ 5.1kW(MMA)
Rated input Current :45.8A(MIG)/ 34.0A(TIG)/ 46.3A(MMA)
No load voltage : 70± 5 V
Current range: 35-140A(MIG)/15-140A(TIG)/ 30-120A(MMA)
Applicable electrode dia.: 0.8-16 mm(MiG)/ 1.6-3.2 mm(MMA)
TIG Tungsten electrode: MAX 2.4 mm
Duty cycle (%): 60%
Refrigeration type: Fan
Efficiency : 0.73μ
Power factor: 0.73 Cos
Insulation class :F Grau
Protection class: 21S lP
Dimension LxWxH: 12.2 x 6.5 x 8.3 in

Voltage: 110 V±15%
Frequency : 50/ 60 Hz
Phase: 1
Rated input Power: 5.0kW(MIG)/ 3.7kW(TIG)/ 5.1kW(MMA)
Rated input Current :45.8A(MIG)/ 34.0A(TIG)/ 46.3A(MMA)
No load voltage : 70± 5 V
Current range: 35-140A(MIG)/15-140A(TIG)/ 30-120A(MMA)
Applicable electrode dia.: 0.8-16 mm(MiG)/ 1.6-3.2 mm(MMA)
TIG Tungsten electrode: MAX 2.4 mm
Duty cycle (%): 60%
Refrigeration type: Fan
Efficiency : 0.73μ
Power factor: 0.73 Cos
Insulation class :F Grau
Protection class: 21S lP
Dimension LxWxH: 12.2 x 6.5 x 8.3 in

Voltage: 110 V±15%
Frequency : 50/ 60 Hz
Phase: 1
Rated input Power: 5.0kW(MIG)/ 3.7kW(TIG)/ 5.1kW(MMA)
Rated input Current :45.8A(MIG)/ 34.0A(TIG)/ 46.3A(MMA)
No load voltage : 70± 5 V
Current range: 35-140A(MIG)/15-140A(TIG)/ 30-120A(MMA)
Applicable electrode dia.: 0.8-16 mm(MiG)/ 1.6-3.2 mm(MMA)
TIG Tungsten electrode: MAX 2.4 mm
Duty cycle (%): 60%
Refrigeration type: Fan
Efficiency : 0.73μ
Power factor: 0.73 Cos
Insulation class :F Grau
Protection class: 21S lP
Dimension LxWxH: 12.2 x 6.5 x 8.3 in

Voltage: 110 V±15%
Frequency : 50/ 60 Hz
Phase: 1
Rated input Power: 5.0kW(MIG)/ 3.7kW(TIG)/ 5.1kW(MMA)
Rated input Current :45.8A(MIG)/ 34.0A(TIG)/ 46.3A(MMA)
No load voltage : 70± 5 V
Current range: 35-140A(MIG)/15-140A(TIG)/ 30-120A(MMA)
Applicable electrode dia.: 0.8-16 mm(MiG)/ 1.6-3.2 mm(MMA)
TIG Tungsten electrode: MAX 2.4 mm
Duty cycle (%): 60%
Refrigeration type: Fan
Efficiency : 0.73μ
Power factor: 0.73 Cos
Insulation class :F Grau
Protection class: 21S lP
Dimension LxWxH: 12.2 x 6.5 x 8.3 in

Engine type: Single cylinder ,air cooling, 2 stroke
Fuel: Mixed oil
(Gasoline: two-stroke engine oil-25:1)
Fuel tank capacity: 1L
Weight: 33 lbs
Displacement: 52 cc
Max power and speed: 2kw/ 9000r/ min
Max torque and speed: 2.4N.m/5000r/ min
Fuel consumption rate: <0.60 l/ h
No load speed: 9000 r/ min
Max blade dia: 16 in
Starter system: Hand pull start

Engine type: Single cylinder ,air cooling, 2 stroke
Fuel: Mixed oil
(Gasoline: two-stroke engine oil-25:1)
Fuel tank capacity: 1L
Weight: 33 lbs
Displacement: 52 cc
Max power and speed: 2kw/ 9000r/ min
Max torque and speed: 2.4N.m/5000r/ min
Fuel consumption rate: <0.60 l/ h
No load speed: 9000 r/ min
Max blade dia: 16 in
Starter system: Hand pull start

Engine type: Single cylinder ,air cooling, 2 stroke
Fuel: Mixed oil
(Gasoline: two-stroke engine oil-25:1)
Fuel tank capacity: 1L
Weight: 33 lbs
Displacement: 52 cc
Max power and speed: 2kw/ 9000r/ min
Max torque and speed: 2.4N.m/5000r/ min
Fuel consumption rate: <0.60 l/ h
No load speed: 9000 r/ min
Max blade dia: 16 in
Starter system: Hand pull start

Single rope: 220lbs/100kg; Double rope: 440lbs/200kg

Wire rope length: 472” in
Power cord: 78.7” in
Handle cable: 157.5’ in
Control mode: wired + emergency stop button
Voltage: 110V
Power: 480W
Speed: 2800r/min
Weight: 22 lbs
Product size: 13.8” x 5.3” x 6.3” in
SHIPPING DIM: 14.6”x 5.9” x 9.1”in

Single rope: 440lbs/200kg; Double rope: 880lbs/400kg
Wire rope length: 472” in
Power cord: 78.7” in
Handle cable: 157.5”in
Control mode: wired + emergency stop button
Voltage: 110V
Power: 850W
Speed: 2800r/min
Weight: 32 lbs
Product size: 15.4” x 5.9”x 7.1”in
SHIPPING DIM: 17.5”x 6.5”x 10.24” in

Rated Voltage:110V-120V/60Hz
Voltage:120V
Power: 1250W
Rated Rotation Speed: 2800 rpm
Rated Torque: 3.9 Nm
Lifting Height: 40ft (Single Cable / 20ft (Double Cable)
Lifting Load Capacity: 660lbs (Single Cable) /1320lbs(Double Cable)
Lifting Speed: 27.6ftMin (Single Cable) /13.8ftMin(Double Cable)

Rated Voltage:110V-120V/60Hz
Voltage:120V
Power: 1250W
Rated Rotation Speed: 2800 rpm
Rated Torque: 3.9 Nm
Lifting Height: 40ft (Single Cable / 20ft (Double Cable)
Lifting Load Capacity: 660lbs (Single Cable) /1320lbs(Double Cable)
Lifting Speed: 27.6ftMin (Single Cable) /13.8ftMin(Double Cable)

Rated power: 1280W
Rated frequency: 50/60HZ
No load speed: 1000-2000r'min
Mixing width: 320mm
Rated voltage:100-240V

Rated power: 1280W
Rated frequency: 50/60HZ
No load speed: 1000-2000r'min
Mixing width: 320mm
Rated voltage:100-240V

6.5 HP Loncin G200F Engine
Gross Weight: 225 lbs
Dimensions: 68"x 20"x 35"

• Type Of Combustion: Air-cooled,single cylinder,4-stroke.

• Centrifugal Force: 16KN.

• Vibrating Frequency: 4750VPM.

• Max Travel Speed: 65.6ft/min.

• Plate Size: 21x18in.

• Shipping (Package Size) : 26*19*28in.

6.5 HP Loncin G200F Engine
Gross Weight: 225 lbs
Dimensions: 68"x 20"x 35"

• Type Of Combustion: Air-cooled,single cylinder,4-stroke.

• Centrifugal Force: 16KN.

• Vibrating Frequency: 4750VPM.

• Max Travel Speed: 65.6ft/min.

• Plate Size: 21x18in.

• Shipping (Package Size) : 26*19*28in.

6.5 HP Loncin G200F Engine
Gross Weight: 225 lbs
Dimensions: 68"x 20"x 35"

• Type Of Combustion: Air-cooled,single cylinder,4-stroke.

• Centrifugal Force: 16KN.

• Vibrating Frequency: 4750VPM.

• Max Travel Speed: 65.6ft/min.

• Plate Size: 21x18in.

• Shipping (Package Size) : 26*19*28in.

Input Voltage: 110V/220V
Frequency: 50/60HZ
Rated input capacity: 4.8KVA
Max No-Load Voltage: 300V
Current Range: 10-40A
Arc starting method: HF are starting
Cutting Thickness: 6-12mm

Input Voltage: 110V/220V
Frequency: 50/60HZ
Rated input capacity: 4.8KVA
Max No-Load Voltage: 300V
Current Range: 10-40A
Arc starting method: HF are starting
Cutting Thickness: 6-12mm

Input Voltage: 110V/220V
Frequency: 50/60HZ
Rated input capacity: 4.8KVA
Max No-Load Voltage: 300V
Current Range: 10-40A
Arc starting method: HF are starting
Cutting Thickness: 6-12mm

Applicable product: excavator
Excavator tonnage:1-1.5T excavator
Applicable to various sites such as crushing and splitting of hard soil, sub hard stones, and weathered stones
Pin size: 25mm
Wheelbase: 90mm
Opening size: 90mm

Material: Steel 
Length: 32 in 
Tooth plate thickness: 1/2 in 
Weight: 33 kg/73 lbs

Weight:776 lbs
Hydraulic Flow Required:14-20 gpm
Cutting Blades:2
Material Cutting:Up to 3" dia
Cutting Width:66 in
Wide (Overall):72 in
Height (Overall):21.6 in
Minimum Cutting Height:2 in
Deck Thickness:3/16 in
Length (Overall):76 in

Width:86 in
Tilling Width (maximum): 72 in
Length: 26 in
Height: 24 in
Tilling Depth: 7 in
Weight: 573 lbs
Number of Tines: 36

Width:86 in
Tilling Width (maximum): 72 in
Length: 26 in
Height: 24 in
Tilling Depth: 7 in
Weight: 573 lbs
Number of Tines: 36

Trenching Depth: 48 in
Trenching Width: 8 in
Flow Rec:20-30 gpm
Clearing Auger Diameter:15 in

Width:71”in
Power: 38-54 hp
Weight: 860 lbs
Execution standards: Q/SG 010-2024
Equipment size: 80.7”x 27.6”x 32.7’
SHIPPING WEIGHT: 904 lbs

Width:71”in
Power: 38-54 hp
Weight: 860 lbs
Execution standards: Q/SG 010-2024
Equipment size: 80.7”x 27.6”x 32.7’
SHIPPING WEIGHT: 904 lbs

Fork Rating:4,000 lbs
Mounting: Universal Skid Steer
Forks:48 in Long Adjustable With Locks
Side Steps:2
Headache Rack: Beveled
Fork Tines LxWxH:48" x 4" x 1 1/2"

Class II
Weight:330 lbs

Fork Rating:4,000 lbs
Mounting: Universal Skid Steer
Forks:48 in Long Adjustable With Locks
Side Steps:2
Headache Rack: Beveled
Fork Tines LxWxH:48" x 4" x 1 1/2"

Class II
Weight:330 lbs

Fork Rating:4,000 lbs
Mounting: Universal Skid Steer
Forks:48 in Long Adjustable With Locks
Side Steps:2
Headache Rack: Beveled
Fork Tines LxWxH:48" x 4" x 1 1/2"

Class II
Weight:330 lbs

Width: 72 in
Weight: 511 lbs
Height: 26 in
Cylinder: 2 in Bore 6 in Stroke
Overall Length: 36.26 in
Max Opening: 39 in
Weight: 520Ibs